Home › Repair times › Watertek › Loncin G700 30/250

Watertek Loncin G700 30/250 repair times and service schedule

Name: Watertek Loncin G700 30/250
Brand: Watertek

Watertek Loncin G700 30/250: 250 bar · 30 l/min · cold water, petrol mobile / wheeled pressure washer. Below are the recommended service intervals and guide labour times. The annual service takes about 1 h 30 min.

Skid version available.

Specifications

TypeCold water, petrol

FormatMobile / wheeled

Pressure250 bar

Flow rate30 L/min (1800 L/h)

EngineLoncin G700

StatusCurrent model

Model codeLONCIN-G700-30-250

Service schedule and repair times

Every 6 months

Operation	Guide time	Hours
Air Filter Replacement	10 min	0.17 h
6-Month Intermediate Service	1 h	1 h

Every 12 months

Operation	Guide time	Hours
Spark Plug Replacement	10 min	0.17 h
Engine Oil Change	15 min	0.25 h
Fuel Filter Replacement	15 min	0.25 h
Pump Oil Change	15 min	0.25 h
Annual Full Service	1 h 30 min	1.5 h

Every 24 months

Operation	Guide time	Hours
Engine Valve Clearance Adjustment	40 min	0.67 h

Repairs (as required)

Operation	Guide time	Hours
High-Pressure Hose Replacement	Members
Recoil Starter Replacement	Members
Unloader Valve Replacement	Members
Diagnostic — Fault Finding	Members
Check Valve Replacement (set)	Members
Pump Seal Kit Replacement	Members
Carburettor Clean / Rebuild	Members
Engine Replacement	Members
Pump Rebuild (full)	Members

Guide times are for a competent technician with the correct parts and tools, and exclude travel. Always follow the manufacturer's service documentation. Specifications: manufacturer data.

See every repair time for the Watertek Loncin G700 30/250

PressureBook members get the full repair-time schedule, allocated times, parts lists and one-click quotes that fill in labour from these times. Try it free for 14 days, no card needed.

Start free trial

Other Watertek machines